Insole Stiching Machines, literally I think we should all understand that embroidery machine, embroidery machine, or embroidery machinery. In the embroidery just started from the time of hand embroidery, when the so-called embroidery machine is not really a sense of the embroidery machine, because the embroidery machine is a traditional sewing machine, put on a small round hole with the bottom of the sewing machine needle non-stop Up and down, coupled with hand-held embroidered frame with a tight cloth, back and forth, in fact, this so-called Insole Stiching Machines, in fact, is still a kind of embroidery.
Insole Stiching Machines Mechanical and Electrical Principle:
First with embroidery CAD software plate, after generating the pattern, will contain the embroidery procedures and patterns of discs were placed in the computer disk drive, under the control of the program, the computer will be converted into the pattern coordinates and the box frame X, Y direction The amount of displacement of the equivalent of the electrical signal, sent to the X, Y, Z single-chip system for motor speed and speed processing, the output three-phase six-beat, line motor power amplifier for power amplification, red support X, Y stepper motor, driven Stretch frame to complete the X, Y between the feed movement; at the same time drive Z stepper motor, driving the needle for the upper and lower movement, so that embroidery continued to go on.
Z stepping motor is driven by a synchronous toothed belt or the like to drive the head drive mechanism. The specific mechanism of the nose causes the lead mechanism and the needle to take the lead line to make the lower movement and puncture the fabric. The upper thread around the possession of the bottom line bobbin case; thread take-up mechanism movement, conveying the upper thread, tighten the stitch, prepare the next stitch line. X, Y stepper motor through the synchronous toothed belt and other institutions to drive the frame and fabric for plane movement. Will be on the fabric to be embroidered at the track point to the needle embroidery, needle movement up and down the movement and the direction of the frame, the amount of movement and movement speed coordination with the movement, so that the upper thread and the bottom line twisted on the fabric Make a two-wire lock stitch. When the embroidery continues to proceed, complete the pattern of computer embroidery.